Workboats-USA Inventory

This U.S. Flagged steel Freezer trawler for sale has just completed haulout and refit March 2019. Refit was performed from a well maintained vessel and included sandblasting of topsides and bottom, then thoroughly primed and repainted. Her economical (16gph) 470 HP CAT 3408 was rebuilt in 2017 . This is not your typical rust belt trawler and is reported to be in excellent condition by owner and ready to fish.

This freezer trawler for sale was just drydocked in July 2019. Topsides recently painted (September 2019). Other upgrades including new Jones trawl 12 x 44 aluminum doors (2019). Vessel Owner reported this fishing boat to be in excellent condition. Ice hold has been refoamed and finished as new. Pilothouse windows were recently replaced with Lexan material. Many stainless steel upgrades as well.

This steel shrimper for sale comes with new nets, trawl doors and a 300 box freezer. Now being sold Exclusively direct with owner, she is also equipped with an ice machine, joy stick controls on aft deck with accompaning engine room throttles. April 24th, 2018 haul out included pressure wash and Protective Glove Latex anti fouling paint.

This steel shrimp boat for sale is a USCG documented vessel powered by a CAT 3408 DITA Marine diesel and accommodates a 30,000# fish hold with 110 blocks of ice, 45 in back and 65 in front. Owner wants to keep nets.

This late model, ABS Classed, 2011 anchor handling tug for sale is a vessel designed with the objective of either tugging, towing an offshore oil-rig, a ship or use as af firefighting rescue vessel. Extreme deck strength capable of handling 5 Ton/m2, with 3,280' of Towing Wires. She has a working speed of 12 kts consuming approximately 2,550 US GPD.

This 50' Pushboat Tug was built in the USA in 1995 by Cenac Marine. Maximum eye level with mast is 27' and without @ 22'. She is powered by Twin Cummins K19's totalling 900 HP. Twin Disc gears turn 48 x 48" props and 5". RTO K19's recently installed with rebuilt underwater gear.

This liftboat vessel is 115' in length with a Max Deck Capacity of 800,000# , supporting (3) 200' 66"diameter legs with a wall thickness of 1 3/4", being braced inside. Maximum Working Water Depth: 160' Max Sea Conditions: 5' (Jacking). Currently undergoing USCG inspections and should be ready to view April 2019.

This freshwater 300' x 60' x 11' deck barge has 24 rooms below deck (some with heat), a water purification and sewer treatment station, bow thrusters, tool cages and a wash down system. An extremely heavy built barge ready to be put to work. Email us below for more details and pricing.

This USCG approved passenger vessel is an aluminum constructed crew boat with a model bow and square stern, a semi - V bottom and hard chines. The bottom plating is 1/2 "from the stern forward 40ft and the remaining is 3/8"plating. Vessel is twin screw and powered by twin Cummins K19 with a speed of 26 knots. One is new and the other with only 5K hours. Current COI for 26 passengers plus crew. Coast Guard approved to provide services on near coastal water route up to 100 miles offshore. Additional passenger capacity can be added by request. The hull is arranged from forward to aft as follows: Wheel house raised 11/4 level above main deck Crew berthing and galley combination below the wheelhouse Passenger lounge with double bottom void with forward fuel and pot..

This USCG approved passenger vessel is an aluminum constructed crew boat with a model bow and square stern, a semi - V bottom and hard chines. The bottom plating is 1/2 "from the stern forward 40ft and the remaining is 3/8"plating. Vessel is twin screw and powered by twin Cummins K19 with a speed of 26 knots. One is new and the other with only 5K hours. Current COI for 26 passengers plus crew. Coast Guard approved to provide services on near coastal water route up to 100 miles offshore. Additional passenger capacity can be added by request. The hull is arranged from forward to aft as follows: Wheel house raised 11/4 level above main deck Crew berthing and galley combination below the wheelhouse Passenger lounge with double bottom void with forward fuel and pot..

This ABS Spud Barge can be purchase through Workboats-USA, LLC., and was built in 2008. She is an ABS / A1 classed barge with an approximate Cargo Capacity at Max Load Line of 1126 LT (1144 Metric Tons), Approximate Deck Loading : 2000 lbs/square foot (10 metric tons/square meter) GRT / NRT : 492 / 147. Length Overall is 140.0 feet (42.67 meters) Breadth of 54.0 feet (16.45 meters) and Depth of 9 feet (2.74 meters). Max Draft : 6.9 feet (2.1 meters) Approximate Light Ship Weight : 275.5 LT (279.9 Metric Tons) Approximate Transverse Bulkhead : 4 (2) Longitudinal Bulkheads with 11 Compartments.

This 1981 Aluminum Freezer boat is equpped with a stainless steel brine tank and a 5 HP Blast Freezer. She is located in the U.S. GOM and powered by a 2013 Cummins QSM 11 Marine engine and a 40 KW Kubota genset.