|
109. |
|
(2) 40' x 10' x 4' Sectional Spud Barges On Order
|
|
|
|
40'
|
|
|
Barge Details 2 – 10’ x 40’ x 4’ deep Sections are raked 38° one end with a 12” channel head log Three (3) compartments each section with three (3) flush mounted water tight hatches Four (4) - 18” welded kevels on each section A36 1/4” plate throughout. All seams welded inside and out below the deck plate Transverse frames on 2’ centers with 3”x3”x1/4” angle Longitudinal angles under deck on 18” centers: 3”x3”x1/4” angle Connecting angles of 6”x4”x5/8” angle on connected sides (1) with connecting pins on 4’ centers Two 12” x .500” wall thickness pipe spud wells on each section, 6” above deck Sections sandblasted on outside Deck coated with two..
|
110. |
|
70' Bering Long Range Cruiser
|
|
2019
|
Bering 70
|
70'
|
|
|
This Explorer Yacht features a contemporary interior and exterior design, a departure from the more traditional styling found on many of today’s long distance motor yachts, but her capabilities are that of a true blue water traveler. She features a pilothouse deck, full displacement hull and a range of over 2,500 nautical miles.
|
111. |
|
Self Propelled 32' Push Boat Barge on Order
|
|
2024
|
Self Propelled Supd Barge
|
32'
|
|
|
All steel material wheelabrated and preprimed with inorganic zinc incl incl Transverse water-tight bulkhead (1) Deck winch pads on bow 2 incl Deck cleats 6 incl incl 4 internal spudwells 8" diameter and 2 spuds 6" by 20ft long 1 incl 100 gal fuel tank 1 incl incl 2 watertight flush manway hatches 2 incl incl 3 coat paint system with antifouling and bolt on anodes Engine crash guard (removable) 1 incl incl Tiger 7543 crane with wireless remote, 7500lb cap and 30ft reach Hydraulic power unit Honda GX series gas engine 1 included Yamaha 200 XL Shaft engines with hydro strg, batteries, all rigging, etc 2 incl incl Hydraulic wteering system with wet tie-bar connection 1 incl incl
|
112. |
|
40'x 11x 4' Medium Duty, Raked Truckable Barge on Order
|
|
2022
|
Heavy Duty Raked Barge
|
40'
|
|
|
Barge Details – 1 - 11’8”x 40’x 4’ deep Sectional Barges are raked 38 degrees one end with 12” channel head log Three (3) compartments each section three (3) flush mounted watertight hatches Four (4) 18” welded kevels placement per customer specs A36 3/16” plate throughout except for deck A36 ¼” plate. All seams welded inside and out below the deck plate Two (2) bulkheads welded in barge,3/16” plate. Transverse frames on 24” centers: 3”x3”x3/16” angle Longitudinal angles under deck 3”x3”x3/16” on 18” centers Sections sand blasted on outside to commercial grade, one coat zinc rich epoxy for added corrosion protection Deck co..
|
113. |
|
2020 Series 2070 Dragon® Cutterhead Dredge For Sale
|
|
2020
|
2070 Cutterhead Dredge
|
110'
|
|
|
This 2020 Truckable Series 2070 Dragon® cutterhead dredge is capable of dredging up to 50′ (15 m)! The hull and deckhouse is designed to Bureau of Veritas (B.V.) Sheltered Water Rules. This dredge is made for harbor dredging, river dredging, land reclamation, and sand mining projects.
|
114. |
|
120' Steel Landing Craft For Sale
|
|
1955 Refit Completed in 2019
|
Landing Craft
|
110'
|
|
|
The vessel was originally designed by the military to carry 14 crewmen in the aft house area on the main deck but has now been modified. The original crew quarters on the port side is now utilized as a break/recreation room while the smaller CPO berthing space retains two metal bunk beds for crew rest.
|
115. |
|
100' Twin Screw 1,720 HP Ocean Going Tug
|
|
1967
|
Ocean Going Tug
|
100'
|
|
|
This Twin CAT 1,720 HP powered steel tug was built in 1967, by Jakobson Shipyard of Oyster Bay, New York. Powered by two, Caterpillar D-398 TA diesel engines with Caterpillar reduction gears she turns two 96(in) by 60(in), fixed pitch propellers. Her electrical service is provided by two, 65kW, Marathon generator sets. Driven by two, John Deere 4045 FM 75 diesel engines. The tug's capacities are 32,000 gallons of fuel, 100 gallons of hydraulic oil, 500 gallons of lube oil, and 5,000 gallons potable water.
|