|
25. |
|
New 60' x 20' x 5' Spud Barge #219
|
|
2023
|
Spud Barge
|
60'
|
|
|
60' x 20' x 5' & 7' Dimensional selections Main Deck Plating = 3/8" Side Shell Plating = 5/16" Bottom Shell & Rake Bottom Plating = 5/16" Transom Plating = 5/16" 4x3x1/4” Angle Stiffeners on Hull Plates 3x2x1/4” Angle Stiffeners on Bulkheads Channel 10” Transverse Buck Frames as required Two 1/4” plate transverse watertight bulkheads Two 1/4" plate longitudinal bulkheads Six (6) dry void compartments (not for ballast) Radius corners for bilge and deck knuckles. 2 coats AF paint system for UW hull. Freeboard and rake are painted inorganic primer with two coats of navy blue. Deck is in organic primer with two..
|
26. |
|
Inland Hopper Barges & Tug for sale
|
Custom Build
|
2005 60' Towboat
|
|
60'
|
|
|
These Hopper Barges for sale have been sold as a complete package. Call Bob Carlson at 954-224-2628 for alternatives. Motivated seller of (2) 275' x 54' lead and 260' x 54' second box barge.Lead barge fitted with 540 HP 4-channel bow thruster. Overall unit is 595' in length. We were offering these two inland hopper barges as an entire unit, complete with a 60' 2005 towboat with a retractable wheelhouse. This is a highly desirable hopper barge combination with 275' x 54' x 12' lead hopper barge and 260' x 54' second box hopper barge. Overall unit is 595' in length. This pushboat tug has an air operated retractable wheelhouse. Minimum height 17'. Max height of eye 30'. Capable of transporting approx. 8,000T of ag..
|
27. |
|
Pilot Boat, Dredge Crew Boat or Survey Boat For Sale
|
|
1984
|
Pilot Patrol Boat, Survey Boat
|
57'
|
|
|
Highest and best use of this 25 KT, 57' Breaux Baycraft would be as a Pilot Boat, Dredge Crew Boat or Survey Boat for private use. No COI.
|
28. |
|
Anchor Handling Tug For Sale
|
|
2010
|
AHTS Ocean Going Tug
|
51 M
|
|
|
This ABS + A1 Towing vessel for sale is powered by Twin 3,983 HP MAK 9M25's spinning 2 x 4 Bladed props within ZF CPP Fixed Kort nozzels. In brief, Bollard pull is 106 Tons with a maximum speed of 12kts at 750 RPM. The Electro towing winch is supported by a 200 ton brake holder and 150T pull. See specifics in boxes above. She accommodates 20 persons in 8 cabins.
|
29. |
|
50' x 12' x 5' Sectional Barges On Order
|
|
2021
|
Sectional Spud Barge
|
50'
|
|
|
Barge Details – 2 - 12’x 50’x 5’ deep Also 12' x 57' x 4' Sectional Spud Barges Sectional Barges are raked 38 degrees one end with 12” channel head log Three (3) compartments each section three (3) flush mounted watertight hatches Four (4) 18” welded kevels on port and on starboard sides of the assembled platform • A36 1/4” plate throughout. All seams welded inside and out below the deck plate Two (2) bulkheads welded in barge, ¼” plate. Transverse frames on 24” centers: 3”x3”x1/4” angle Longitudinal angles under deck 3- 3”x3”x1/4” on 18” centers Connecting angles of 6”x4”x5/8&rd..
|
30. |
|
50' Self Propelled Spud Barge On Order
|
|
2024 - Appx 8 Weeks to Completion
|
2024 Self Propelled Spud Barge
|
50'
|
|
|
50x12x4 Raked Bow Barge with following features: 1/4" Plate, 3x3x1/4" framing on 24" centers, 6 cleats, Flush manway, 2 coat epoxy paint system on exterior Internal spudwell 8" 6" sch80 steel spuds 20ft long with hats and pins Antifouling on underwater hull including 3rd coat of epoxy Bolt on plate anodes Aluminum console, dual engine brackets, rigging pipe chase 18" Structural crane pedestal and 6" elevated HPU platform Tiger 1069 Crane- 11,000lb max cap and 29ft max reach BravePro powerpack with 20 HP Honda Engine (2)Yamaha 115 XL shaft with all rigging and install (hydro steering, stainless props, batteries, controls, cables, harness, gauges, etc) Spud ring lifting collars
|
31. |
|
50' U.S Government Steel Push Boat For Sale
|
|
|
Pushboat
|
50'
|
|
|
US Government Steel Construction: Length/Beam/Draft: 50’ x 14’ x 2.6’ draft Engine (s) / Type: (2) Detroit Diesels 6-71 Horsepower: 400 HP total Gear/Ratio: Twin Disc 2.0:1 Prop: 18” Tunnel Drive. Comments: 500-gallon fuel capacity, 7 knots speed. No electronics, Push knees. Owner reported in excellent condition.
|
32. |
|
(2) 50' x 14' Truckable Pushboats For Sale
|
|
|
50' Truckable Push Boats
|
50'
|
|
|
Construction: Steel Length/Beam: 50’ x 14’ Engine (s) / Type: (2) Cummins 6BT Horsepower: 300 HP @2800 rpm each Price: Please call for Price Description / Comments: 2 units available
|
33. |
|
Offshore Support Vessel for Sale
|
Custom Build
|
New Build slot available- Several Late model used
|
Offshore Supply Vessel
|
45M
|
|
|
Workboats-USA offers a complete line of new and used offshore supply vessels for sale and charter. GENERAL FUNCTIONS: Our OSV's for sale are multi-role tugs used at terminals for SBM and FPSO support operations. CLASSIFICATION Bureau Veritas or equivalent I, HULL, MACH, Tug, unrestricted navigation, AUT-UMS, Fire-fighting #1. DIMENSIONS: LENGTH O.A. 45.90 m BEAM MLD. 12.80 m DEPTH AT SIDES 5.80 m DRAUGHT DESIGN 4.80 m DEADWEIGHT 640 ton DECK LOAD (1 M ABOVE DECK) 200 ton WORK DECK AREA 200 m2 T PERFORMANCES (APPROX.) SPEED (AT DESIGN DRAUGHT) 14.5 kn BOLLARD PULL 80 ton PERFORMANCES (APPROX.) SPEED (AT DESIGN DRAUGHT) 14.5 kn BOLLARD PULL 80 ton PROPULSION SYSTEM MAIN ENGINES 2x 8M25C TOTAL PROPULSION POWER 5600 bkW (7616 bhp) at 750 rpm AZIMUTH THRUSTERS 2..
|
34. |
|
AHTS Tug For Sale
|
|
2011
|
Anchor Handling Tug Supply Vesel
|
45 Meters (147.63 Feet)
|
|
|
This late model, ABS Classed, 2011 anchor handling tug for sale is a vessel designed with the objective of either tugging, towing an offshore oil-rig, a ship or use as af firefighting rescue vessel. Extreme deck strength capable of handling 5 Ton/m2, with 3,280' of Towing Wires. She has a working speed of 12 kts consuming approximately 2,550 US GPD.
|
35. |
|
New 40'x12'x 4' Construction Barge for Sale- On Order
|
|
2023 Model
|
Spud Barge
|
40'
|
|
|
Just like new. This spud barge was recently built for owner that was too big for their project. Now must sell.
|
36. |
|
40' x 10' x 4' Spud Barges for Sale
|
|
2021
|
|
40'
|
|
|
Our new work barge features a raked bow, Heavy duty rub rails, Oversized large bitts and Centerline bulkheads. Pin 2 for 40x20 barges...easy to transport. 1/4 " plate construction & 10" spud collars / wells. Also can build 40X20 if a single barge is needed.
|