50' x 12' x 5' Sectional Barges On Order

All Ads by User | Add to Favorites | Reply to Ad | Tell Your Friends

Ad Number:	798
Year:	2021
Model:	Sectional Spud Barge
Length:	50'
Beam:	12' We can build to 11’11” shipping width by building barge 11’4” wide to reduce freight and escorts.
Light Draft / Max Draft /Light Ship Weight/:	5'
Overstock Price:	POR
Boat Location:	Built in the USA
Special Features: Four (4) 18” welded kevels on port and on starboard sides of the assembled platform  •        A36 1/4” plate throughout. All seams welded inside and out below the deck plate  Two (2) bulkheads welded in barge, ¼” plate.   Transverse frames on 24” centers: 3”x3”x1/4” angle  Longitudinal angles under deck 3- 3”x3”x1/4” on 18” centers Connecting angles of 6”x4”x5/8” angle on all sides with 1-3/4” pins on 4’ centers Two 12” x .500” wall thickness pipe spud wells on each section, 6” above deck Sections sand blasted on outside  Deck coated with two coats gray epoxy with a non-skid additive.   Trucking dimensions:  12’8” X 50’ X 5’6” with kevels welded on deck.  Freight charges not included.  One section per truck.  Freight quote is available upon request.  We can build to 11’11” shipping width by building barge 11’4” wide to reduce freight and escorts.
Contact Us:	Email Us
Call Us:	Bob - 954.224.2628

Barge Details – 2 - 12’x 50’x 5’ deep  Also 12' x 57' x 4' Sectional Spud Barges

• Sectional Barges are raked 38 degrees one end with 12” channel head log
• Three (3) compartments each section three (3) flush mounted watertight hatches
• Four (4) 18” welded kevels on port and on starboard sides of the assembled platform  •        A36 1/4” plate throughout. All seams welded inside and out below the deck plate 
• Two (2) bulkheads welded in barge, ¼” plate.  
• Transverse frames on 24” centers: 3”x3”x1/4” angle 
• Longitudinal angles under deck 3- 3”x3”x1/4” on 18” centers
• Connecting angles of 6”x4”x5/8” angle on all sides with 1-3/4” pins on 4’ centers
• Two 12” x .500” wall thickness pipe spud wells on each section, 6” above deck
• Sections sand blasted on outside 
• Deck coated with two coats gray epoxy with a non-skid additive.
• Barge coated with 2 coats black marine epoxy 
• Interior coated with one coat of gray epoxy 
• No Anti-foulant
• Eight (8) Zinc anodes 12” X 6” X 1 ¼” bolt-on type each section

Trucking dimensions:  12’8” X 50’ X 5’6” with kevels welded on deck.  Freight charges not included.  One section per truck.  Freight quote is available upon request.  We can build to 11’11” shipping width by building barge 11’4” wide to reduce freight and escorts.

OPTIONS: 

• Sand blast to commercial quality for added corrosion protection.  One coat of zinc rich epoxy primer on outside of barge before epoxy coating.  Add $4,500.00 total for two sections.  
• Heavier Frames; Replace top frame member, 3”x3”1/4” angle, with 5” x 6.7 lb. channel. Add $2,100.00 total for two sections.

A Disclaimer:
While we attempt to display current and accurate data, this listing may not reflect the most recent transactions or may contain occasional data entry errors.
Selling agent makes no warranties, express or implied, regarding the content or today's availability of the products described herein. All equipment and statements listed are subject to today's availability, classification, certification changes, contract in progress or prior sale. Photographs may be representative only, may feature optional equipment offered at extra cost and may vary somewhat from the actual items offered for sale.