|
71. |
|
50' U.S Government Steel Push Boat For Sale
|
|
|
Pushboat
|
50'
|
|
|
US Government Steel Construction: Length/Beam/Draft: 50’ x 14’ x 2.6’ draft Engine (s) / Type: (2) Detroit Diesels 6-71 Horsepower: 400 HP total Gear/Ratio: Twin Disc 2.0:1 Prop: 18” Tunnel Drive. Comments: 500-gallon fuel capacity, 7 knots speed. No electronics, Push knees. Owner reported in excellent condition.
|
72. |
|
80' Steel Freezer Trawler For Sale
|
|
1996
|
Steel Freezer Trawler
|
80'
|
|
|
Owner reported boat is ready to fish. Drydocked in 2021.
|
73. |
|
Pilot Boat, Dredge Crew Boat or Survey Boat For Sale
|
|
1984
|
Pilot Patrol Boat, Survey Boat
|
57'
|
|
|
Highest and best use of this 25 KT, 57' Breaux Baycraft would be as a Pilot Boat, Dredge Crew Boat or Survey Boat for private use. No COI.
|
74. |
|
60' COI Certified Tug/Passenger Vessel with 120'ABS Loadline Deck Barge
|
Custom Build
|
2012
|
COI Certified Tug/Passenger Vessel / ABS Deck Barge Offering
|
60' Tug with 120' ABS Barge
|
|
|
This COI certified 26 Passenger Tug is fully capable to deliver passengers, cargo and fuel anywhere in the USA or Caribbean.
|
75. |
|
New 40'x12'x 4' Construction Barge for Sale- On Order
|
|
2023 Model
|
Spud Barge
|
40'
|
|
|
Just like new. This spud barge was recently built for owner that was too big for their project. Now must sell.
|
76. |
|
40' x 20' x 5' Hydraulic Spud Barge On Order
|
Custom Build
|
2022
|
Hydraulic Spud Barge
|
40'
|
|
|
Specifications 40' x 20' x 5' Hydraulic Spud Barge Main Deck Plating = 5/16" Side Shell Plating = 5/16" Bottom Shell & Rake Bottom Plating = 5/16" Transom Plating = 5/16" 5x3x1/4” Angle Stiffeners on Hull Plates 5x3x1/4” Angle Stiffeners on Bulkheads One (1), 1/4" plate transverse bulkhead Two (2) coats anti-corrosive marine epoxy and one (1) coat of anti-fouling on the underwater hull. Outfitting: Two (2) 18” manholes Two (2) hydraulic spuds Proposed Scheduling Barge Delivery: Four (4) months after receiving first batch of material to the shipyard. We will do all we can to cut this time. Proposed Payment Schedule 30% due at contract signing. 30% due at erection of bulkheads, shell..
|
77. |
|
40'x 11x 4' Medium Duty, Raked Truckable Barge on Order
|
|
2022
|
Heavy Duty Raked Barge
|
40'
|
|
|
Barge Details – 1 - 11’8”x 40’x 4’ deep Sectional Barges are raked 38 degrees one end with 12” channel head log Three (3) compartments each section three (3) flush mounted watertight hatches Four (4) 18” welded kevels placement per customer specs A36 3/16” plate throughout except for deck A36 ¼” plate. All seams welded inside and out below the deck plate Two (2) bulkheads welded in barge,3/16” plate. Transverse frames on 24” centers: 3”x3”x3/16” angle Longitudinal angles under deck 3”x3”x3/16” on 18” centers Sections sand blasted on outside to commercial grade, one coat zinc rich epoxy for added corrosion protection Deck co..
|
78. |
|
125' x 54' x 9' Auto Powered Spud Barge
|
|
2015
|
Spud Barge
|
125'
|
|
|
This 2015 Deck Barge is currently on charter to January 2022. It will take up to a 200' Crane and is equipped with Auto-Powered Spuds.
|
79. |
|
135' U.S. Built Steel Landing Craft for Sale
|
|
|
Landing Craft
|
135'
|
|
|
Powered by Twin 12V-71 Detroit Marine Diesels totalling 1000 HP, this U.S. built steel landing craft for sale has a cruising speed of approximately 11 knots.
|
80. |
|
40' x 10' x 4' Spud Barges for Sale
|
|
2021
|
|
40'
|
|
|
Our new work barge features a raked bow, Heavy duty rub rails, Oversized large bitts and Centerline bulkheads. Pin 2 for 40x20 barges...easy to transport. 1/4 " plate construction & 10" spud collars / wells. Also can build 40X20 if a single barge is needed.
|