|
1. |
|
24' Self Propelled Workboat Barge
|
|
2025
|
Self Propelled Workboat Barge
|
24'
|
|
|
24x10x3 Pushboat, 1/4" plate, 3x3x1/4" angle frames on 20" spacing, 4ft tall push knees, elevated control platform, flush water-tight manway hatch All steel wheelabrated and preprimed with inorganic zinc 3 coat paint system with antifouling and bolt on anodes
|
2. |
|
78' LCM Landing Craft For Sale
|
Custom Build
|
|
78' LCM Landing Craft For Sale
|
78;
|
|
|
This 78ft Steel LCM-8 Landing Craft For Sale is the sistership of same owners vessel coming available 2-2025. Both Reported in good overall condition with updated photos and equipment available upon request from registered direct buyers only.Operational bow ramp. 60 long ton deck capacity. Electrical system is 24 volts with battery charging via alternators on both engines. The electrical system components are certified military grade. Telescoping hinged mast - center-line aft of pilothouse. Ramp - hydraulics - vickers pump on starboard main engine (hand pump serves as backup). Nine watertight bulkheads. Port and starboard skeg keels protect the propellers .Cargo well is entirely above the waterline.Pilothouse Layout is approximately 6' x 6' with 7' height. Base to 5..
|
3. |
|
Self Propelled 30'x12'x3' Raked Bow Steel Barge
|
|
2025 / Available 2-11-25 with Purchase Agreement
|
Raked Bow Steel Barge
|
30'
|
|
|
30'x12'x3' Raked Bow steel Barge with the following std features: 1/4" plate, 4 low profile cleats, flush water-tight man hatch, 2x2 angle framing, two coat anticorroisve exterior epoxy paint.
|
4. |
|
Brand New 25' Custom Truckable Tug- Timely Completion
|
Custom Build
|
2025 Model
|
Truckable Tug
|
25'11"
|
|
|
Hull Dimensions: 25’ x 14’ x 4’5” Weight: # 43,000 These truckable tugs are swift, highly manueverable and easy to operate with their Electro-hydraulic steering system. They include PTO driven pumps driven off Twin Disk MG-5075SC Marine Transmissions. Flanking Rudders are available as an option. Finish Sand blasted (near white metal) Main hull (2) coats of Marine Epoxy Deck (2) coats of Marine Epoxy with anti-slip Trunk and cab (1) coat of Marine Epoxy primer and (1) coat of Urethane topcoat. Secondary colors can be added as requested for an additional cost Bottom Paint Optional
|
5. |
|
195' ABS Loadline Spud Barge
|
Custom Build
|
2009
|
ABS Spud Barge
|
195'
|
|
|
To Registered Direct Buyers ONLY, we will provide: International Tonnage Certificate SOPEP Approval Ltr Certificate of Documentation International Load Line Certificate
|
6. |
|
150' Palmer Johnson Super Yacht
|
Palmer Johnson
|
2010
|
Super Yacht
|
150'
|
|
|
Description: This American-built aluminum yacht underwent a refit in 2021-2022, receiving fresh soft furnishings, mechanical upgrades, and state-of-the-art entertainment systems. A true turn-key purchase opportunity.
|
7. |
|
150' Palmer Johnson Sport Yacht
|
Palmer Johnson
|
2010
|
Super Yacht
|
150'
|
|
|
Description: This American-built aluminum yacht underwent a refit in 2021-2022, receiving fresh soft furnishings, mechanical upgrades, and state-of-the-art entertainment systems. A true turn-key purchase opportunity.
|
8. |
|
2023 80' Pershing Model 8X
|
Pershing
|
2023
|
8X
|
83'
|
|
|
Overview: This 80' Pershing is constucted of lightweight carbon fibre resulting in a fast, hyper-performing sport yacht. Multiple welcoming spaces await her new owner inside and out, whether in the sun or cooling off inside her luxurious leather and carbon fibre accented salon.
|
9. |
|
40'x10'x4' Raked Bow Steel Barge
|
|
2024
|
Steel Sectional Barge
|
40'
|
|
|
40'x10'x4' Raked Bow Steel Barge: Standard features: 1/4" plate, 4 low profile cleats, 2 flush water-tight manways, transverse water-tight bulkhead, 3x3x1/4" angle framing on 20" spacing, impact protection outside angle cap on leading edge of headlog and rake as well as verticles on transom, 6" gussets on all 4 corners of each frame, 2 spudwells 8" diameter, 6x4x1/2" connecting rails, 1.25" conn pins Exterior epoxy paint system Accessory brackets on transomTerms: 50% down, balance on completion. Lead time- approx 4 weeks...subject to change!
|
10. |
|
Self Propelled 40' Spud Barge with Ramp
|
|
2024
|
Self Propelled Spud Barge with Ramp
|
40'
|
|
|
This Multi Use, Self Propelled Spud Barge can carry a 40,000 lb. track lift vehicle plus various smaller vehicles such as skid loader, UTV's, etc. This is a very strong, compact package with full 5/16" plate (up from the standard 1/4"), with water tight transverse bulkheads in each barge, and a motorized ramp system and motorized spuds in the rear for holding tight when loading and offloading. Also included is fully processed steel with inorganic zinc coating, and an upgraded paint system with glass flake epoxy, which is much more durable and abrasive resistant for roll on / roll off type of activity. Everything is able to be customized for your individual needs!
|
11. |
|
140' Majesty Superyacht ... U.S. Built by Gulf Craft
|
|
2020
|
140' Majesty
|
|
|
|
DESCRIPTION: A true masterpiece in the world of superyachts powered by twin 2600 16V 2000 M96L Diesel engines, this luxurious vessel is a testament to Gulf Craft's dedication to craftsmanship and innovation. One of the standout features of the Majesty 140 is its tri-deck design, which provides ample space for relaxation and entertainment. The forward main deck boasts a richly finished owner's stateroom that offers breathtaking views of the surrounding seascape through its expansive glass facades. To enhance the experience, thIS stateroom features an elegant extendable terrace, perfect for enjoying a morning coffee or evening cocktail while taking in the beauty of the open water. The owner's en suite is a true oasis of relaxation, complete with a jacuzzi bathtub f..
|
12. |
|
Long Range 80' Steel Offshore Supply Boat - Passagemaker
|
|
2024 Refit from U.S. Builder "Master Marine" in 1977
|
Long Range Cruiser - Utility Supply Boat
|
74'1" Waterline LOA: 80'
|
|
|
This vessel has been considerably upgraded and its overall value greatly enhanced for use as a Passage Maker Yacht or Utility Supply Vessel for the Caribbean. Vessel owners feel that the overall project is 85% complete. The mechanical and navigational side of the project is better than 95% finished with the majority of work remaining much choosing exterior paint and interior stain on the new living quarter walls. So far this year of 2024, vessel owner's have completed renovations by removing interior paneling, insulation, wiring and plumbing down to bare metal bulkheads. A complete list of modifications and improvements, including recent survey, available by request to direct buyers.
|