New & Used Barges for Sale

Barge Details – 1 - 11’8”x 40’x 4’ deep Sectional Barges are raked 38 degrees one end with 12” channel head log Three (3) compartments each section three (3) flush mounted watertight hatches Four (4) 18” welded kevels placement per customer specs

Barge Details 2 – 10’ x 40’ x 4’ deep Sections are raked 38° one end with a 12” channel head log Three (3) compartments each section with three (3) flush mounted water tight hatches Four (4) - 18” welded kevels on each section A36 1/4” plate throughout. All seams welded inside and out below the deck plate Transverse frames on 2’ centers with 3”x3”x1/4” angle Longitudinal angles under deck on 18” centers: 3”x3”x1/4” angle Connecting angles of 6”x4”x5/8” angle on connected sides (1) with connecting pins on 4’ centers Two 12” x .500” wall thickness pipe spud wells on each section, 6” above deck Sections sandblasted on outside Deck coated with two..

Barge Details – 2 - 12’x 50’x 5’ deep Also 12' x 57' x 4' Sectional Spud Barges Sectional Barges are raked 38 degrees one end with 12” channel head log Three (3) compartments each section three (3) flush mounted watertight hatches Four (4) 18” welded kevels on port and on starboard sides of the assembled platform • A36 1/4” plate throughout. All seams welded inside and out below the deck plate Two (2) bulkheads welded in barge, ¼” plate. Transverse frames on 24” centers: 3”x3”x1/4” angle Longitudinal angles under deck 3- 3”x3”x1/4” on 18” centers Connecting angles of 6”x4”x5/8&rd..

60' x 20' x 5' & 7' Dimensional selections Main Deck Plating = 3/8" Side Shell Plating = 5/16" Bottom Shell & Rake Bottom Plating = 5/16" Transom Plating = 5/16" 4x3x1/4” Angle Stiffeners on Hull Plates 3x2x1/4” Angle Stiffeners on Bulkheads Channel 10” Transverse Buck Frames as required Two 1/4” plate transverse watertight bulkheads Two 1/4" plate longitudinal bulkheads Six (6) dry void compartments (not for ballast)  Radius corners for bilge and deck knuckles. 2 coats AF paint system for UW hull. Freeboard and rake are painted inorganic primer with two coats of navy blue. Deck is in organic primer ..

Used 180ft x 42ft x 5ft Causeway Barge for Sale with 2 Spud Wells. Navy Causeway Barge 5’ deck height. Barge is fully modular, and can be made into any configuration. As shown these barges are connected, but can be released into 40' x 10' x 5' Sectionals. Reported to us in very good condition. Price is including extra spuds.

This 150’x35’x8’ Spud Barge For Sale has a raked bow with a square stern. It was just drydocked, painted with any necessary steel work completed. I has 40’ 24” Spuds, steel reinforced with Pull Master hydraulic winches.

This 750 HP Steel Push Boat comes with current Subchapter "M" Rivers Route, 2025 COI. and is being used daily. It is equipped with a fire suppression system mandated by Subchapter M requirements. It is married to a 120' Car Passenger Barge also with current COI until January 2021 for inland waters carrying 216 passengers. The barge has a electrically operated ramp for loading and unloading vehicles and passengers. Seller has a new replacement Barge and Tug combination being delivered in this 4th 2020 Qtr. This means we want this sold now, either as a combination or 2 stand alone units.

General: 16” GIW Booster Model BO-7650D-SP Overall length 22’ (6.7m) Overall width 7’-4” (2.2 m) Assembled height 10’-5” (3.2 m) Approximate weight 34,000 lb (15.4 t) Dredge..

14” DSC DREDGE FOR SALE: Approx 3rd QUARTER 2021 Availability This dredge has a 14” suction pipe and a 12’ discharge pipeline. It is a 34"Cutterhead Dredge with a 5" shaft, that is CAT 3412 diesel powered on a floating 80' platform including ladder. It works off wire rope and spud positioning with all of the features of a conventional aggregate mining contractors dredge. Contact our Exclusive agent, Workboats-USA in the fields below for a viewing. OVERALL LENGTH (WITH LADDER) : 80’ OVERALL WIDTH (WITH SIDE TANK) 18' 3” SPUD LENGTH: (2) 40’ each @ 3000 lbs each ..

This freshwater 300' x 60' x 11' deck barge has 24 rooms below deck (some with heat), a water purification and sewer treatment station, bow thrusters, tool cages and a wash down system. An extremely heavy built barge ready to be put to work. Email us below for more details and pricing.

Just like new. This spud barge was recently built for owner that was too big for their project. Now must sell.

Specifications 40' x 20' x 5' Hydraulic Spud Barge Main Deck Plating = 5/16" Side Shell Plating = 5/16" Bottom Shell & Rake Bottom Plating = 5/16" Transom Plating = 5/16" 5x3x1/4” Angle Stiffeners on Hull Plates 5x3x1/4” Angle Stiffeners on Bulkheads One (1), 1/4" plate transverse bulkhead Two (2) coats anti-corrosive marine epoxy and one (1) coat of anti-fouling on the underwater hull. Outfitting: Two (2) 18” manholes Two (2) hydraulic spuds Proposed Scheduling Barge Delivery: Four (4) months after receiving first batch of material to the shipyard. We will do all we can to cut this time. Proposed Payment Schedule 30% due at contract signing. 30% due at erection of bulkheads, shell..