76' Aluminum Landing Craft
| Ad Number: | 568 |
| Year: | 1965 Refit 2003-2005 |
| Model: | Aluminum Landing Craft |
| Length: | 76' |
| Beam: | 22' |
| Light Draft / Max Draft /Light Ship Weight/: | 8.9" |
| Propulsion/ Props/: | Detroit Series 60's New in 2003 |
| Overstock Price: | $485,000.00 |
| Fuel Capacity, Transfer Rate, Lube Oil: | 2500 gallons |
| Genset(s): | 45 KW 3-71 Detroit Diesel & Northern Lights MD 20KW |
| Boat Location: | CA |
| Contact Us: | Email Us |
| Call Us: | Bob - 954.224.2628 |
This aluminum landing craft for sale with Workboats-USA (Sold 5-2018) had received a major refit and reduced selling price to $485,000.00. Call Bob Carlson for an update on inventory at 954-224-2628.
The refit was completed in January 2003, including installing new engines, transmissions, shafts, props, electrical and hydraulics.
She was built in 1968 by Bombard Industries and has had exceptional care.
Construction:
All welded Aluminum
Shell Plating: 3/8” and 5/16”
Refurbishing continued through1995
Speed: 12 Knots
Tonnage:
Gross: 98 Net: 66
Dimensions:
LOA: 76 ft Beam: 22 ft. Draft: 8.9 ft
Cargo Area: L = 50’ W = 17’ Bulwark Height = 4.5’
Payload = 53 tons
Hydraulic Crane: Capacity - 8 tons
Boom - 40 ft retractable
Turntable - 360° rotation
Operator Location - Ride on
Manufacturer - North American Crane: Power Block – 5 ton, with clamping wheel
Main Engines:
2 x Series 60 Detroit diesels
- Twin Disc 5114. Ratio 2.04:1
- Keel Cooled
- New fuel filters fitted regularly
- Shafting/Propellers:
2 ½” Stainless Steel
Port side and starboard side
Auxiliaries:
45 KW 3-71 Detroit Diesel
Northern Lights MD 20, 20 kw
Furnstrum grid-cooler
Bow Thruster:
1000 GPM with 2 ½” nozzles
Steering:
Dual Rudder
Hydraulic
Fenders:
40” Aircraft Tires – 18 total
Bow, Stern, Port & Starboard sides
Machine Room:
Air Compressor
- Oxy acetylene kit
- Electric welding machine
- Drill Press
- Bench Grinder
- Various pneumatic tools
- Various power tools
Fire Fighting Equipment:
1000 gpm Worthington, stainless steel
- Monitor – 2 ¼” Akron Brass with adjustable nozzle. 2 ½” spray nozzle
- 300’ 1 ½” Hoses & Nozzles
- Hand held extinguishers
DECK MACHINERY
Hydraulic Anchor winch – 300 lb US Navy Anchor (Aft)
- Hydraulic Bow Ramp
- Hydraulic 8 ton crane
- Steering: Electro/hydraulic dual pump
- 2 - Upper & Lower controls Indicators on bridge and aft steering station
Watertight Steel Doors:
All Collision Bulkheads fitted with dogged watertight doors in good condition.
- Pilot House – 2 steel doors port side and starboard side – well fitting
- Crew Facilities:
- Located aft of the Tool Room
- Counter & Cabinets
- Dinette settee table
- Shelf locker
- Sink Unit
- Marine Head
- Shower
- Sharp Microwave Oven
- Magic Chef 4 burner Electric Range
- Refrigerator / Freezer
- Hatch to Tank Room
- Tank Room: Located aft of Engine Space and below Crew Facilities
- Fuel Oil and Water Holding Tanks
- Steering Gear
- Search light
- Navigation and working lights in full compliance
- Life raft with hydrostatic release
- Radar and radio antennas
- Communications/Navigation
- Ritchie 5” Magnetic Compass
- Standard Horizon Spectrum + VHF Radio
- Standard Horizon Intrepid LE VHF Radio
- ICOM IC-M802 HF Radio
- ACR GlobalWatch 2 AIS
- Furuno Radar
- Furuno FMV 603 Radar
- Garmin 168 Map Sounder
- Wheel Steering – Stainless steel
- ComNav Autopilot controls
- Digital engine display
- Steering and Engine Controls
- Bilge Monitor
- Spot Light controls
- Pedestal helm seat
- 3 crew berths
- Raised - 360° visibility
- CAPACITIES:
- Fuel: 2,500 gallons – 3 partially integral welded aluminum
- Lube Oil: 85 gallons
- Fresh Water: 350 gallons – 1 polypropylene cylindrical
- Holding Tank: 35 gallons
A Disclaimer:
While we attempt to display current and accurate data, this listing may not reflect the most recent transactions or may contain occasional data entry errors.
Selling agent makes no warranties, express or implied, regarding the content or today's availability of the products described herein. All equipment and statements listed are subject to today's availability, classification, certification changes, contract in progress or prior sale. Photographs may be representative only, may feature optional equipment offered at extra cost and may vary somewhat from the actual items offered for sale.