Truckable Pushboat Tugs for Sale & Truckable Self Propelled Crane Barges

30x10'x 3' Pushboat, 1/4" plate, 3x3x1/4" angle frames on 20" spacing, 4ft tall push knees, 12" high integrated crane base, elevated control platform with folding top All steel material wheelabrated and preprimed with inorganic zinc (4) 6" Internal spudwells (2) 20' long spuds (4) Low Profile Deck cleats (2) coat paint-anticorrsive system with antifouling and bolt on anodes

32'x12'x3' Raked Bow Steel Barge with the following features: 6" internal spudwells 4" spuds 20ft long with hats and pins 6ft tall push knees with rubber knees 1/4" plate, 5/16 Plate & 4' Draft Add $1,880.00 4 low profile cleats, flush water-tight man hatch, 2x3 angle framing on 20" spacing, two coat anticorroisve exterior epoxy paint Lifting pad eyes 4" steel rubrail on side shell Twin Engine brackets/ Alum console / Enclosed Pilorhouse / Underdeck rigging pipe 36" structural crane base and 6" elevated powerpack platform Antifouling protection paint on underwater hull Bolt-on anodes Tiger 6543 hydraulic extending boom crane Installation and rigging of crane and power unit (material&labor) 20HP Honda gas H..

Hull Dimensions: 25’ x 14’ x 4’5” Weight: # 43,000 These truckable tugs are swift, highly manueverable and easy to operate with their Electro-hydraulic steering system. They include PTO driven pumps driven off Twin Disk MG-5075SC Marine Transmissions. Flanking Rudders are available as an option. Finish Sand blasted (near white metal) Main hull (2) coats of Marine Epoxy Deck (2) coats of Marine Epoxy with anti-slip Trunk and cab (1) coat of Marine Epoxy primer and (1) coat of Urethane topcoat. Secondary colors can be added as requested for an additional cost Bottom Paint Optional

24x10x3 Pushboat, 1/4" plate, 3x3x1/4" angle frames on 20" spacing, 4ft tall push knees, elevated control platform, flush water-tight manway hatch All steel wheelabrated and preprimed with inorganic zinc 3 coat paint system with antifouling and bolt on anodes

30'x12'x3' Raked Bow steel Barge with the following std features: 1/4" plate, 4 low profile cleats, flush water-tight man hatch, 2x2 angle framing, two coat anticorroisve exterior epoxy paint.

Hull Dimensions: 25’ x 14’ x 4’5” Weight: # 43,000 These truckable tugs are swift, highly manueverable and easy to operate with their Electro-hydraulic steering system. They include PTO driven pumps driven off Twin Disk MG-5075SC Marine Transmissions. Flanking Rudders are available as an option. Finish Sand blasted (near white metal) Main hull (2) coats of Marine Epoxy Deck (2) coats of Marine Epoxy with anti-slip Trunk and cab (1) coat of Marine Epoxy primer and (1) coat of Urethane topcoat. Secondary colors can be added as requested for an additional cost Bottom Paint Optional

40'x10'x4' Raked Bow Steel Barge: Standard features: 1/4" plate, 4 low profile cleats, 2 flush water-tight manways, transverse water-tight bulkhead, 3x3x1/4" angle framing on 20" spacing, impact protection outside angle cap on leading edge of headlog and rake as well as verticles on transom, 6" gussets on all 4 corners of each frame, 2 spudwells 8" diameter, 6x4x1/2" connecting rails, 1.25" conn pins Exterior epoxy paint system Accessory brackets on transomTerms: 50% down, balance on completion. Lead time- on new approx 4 to 8 weeks...subject to change!

This Multi Use, Self Propelled Spud Barge can carry a 40,000 lb. track lift vehicle plus various smaller vehicles such as skid loader, UTV's, etc. This is a very strong, compact package with full 5/16" plate (up from the standard 1/4"), with water tight transverse bulkheads in each barge, and a motorized ramp system and motorized spuds in the rear for holding tight when loading and offloading. Also included is fully processed steel with inorganic zinc coating, and an upgraded paint system with glass flake epoxy, which is much more durable and abrasive resistant for roll on / roll off type of activity. Everything is able to be customized for your individual needs!

This 32'x12'x3' Raked Bow steel Barge comes complete with the following std features: 1/4" plate, 4 low profile cleats, flush water-tight man hatch, 2x3 angle framing on 20" spacing, two coat anti-corroisve exterior epoxy paint & Bolt-on anodes. Heavy Duty Option include 5/16" plate and deck would be upgraded to 1/2". Frame angle would be 3x3x5/16 Twin Engine brackets/ Aluminum console / Underdeck rigging pipe Antifouling protection paint on underwater hull Tiger 6543 hydraulic 30' extending boom crane 36" structural crane base and 6" elevated powerpack platform 6" internal spudwells (4) 4" spuds 20ft long with hats and pins (2) Antifouling protection paint on underwater hull Tiger 6543 hydrau..

These 40x14x4 Raked Bow Sectional Barges include the following features: 5/16" plate, 3x3x1/4 framing on 20" spacing, 6 cleats, flush manways, 4x6 angle connecting rails with 1.25" pins, 2 coat Safety Red anticorrosive exterior epoxy paint and antifouling on the underwater hull. (2) 12" spudwells for 10" spuds, all 30ft long with hats and pins included.

32x12x3' Truckable Crane Barge. 1/4" plate, 3x3x1/4" angle frames on 20" spacing, 4ft tall push knees, 12" high integrated crane base, elevated control platform with folding top All steel material wheelabrated and preprimed with inorganic zinc Tiger 6654 crane with wireless remote, 7500lb cap and 30ft reach 1 incl incl Hydraulic power unit Honda GX series gas engine 1 incl incl Yamaha 200 XL Shaft engines with hydro strg, batteries, all rigging, etc 2 incl incl Hydraulic Steering system with wet tie-bar connection Deck winch pads on bow Deck cleats Engine crash guard (removable) Twin Yamaha 200 XL Shaft engines with hydro strg, batteries, all rigging, etc

Two (2) Cummins QSB6.7305MDI 305HP ea. Dometic Electronic Steering 12V Rule Bilge Pump System Two (2) Twin Disc Gears 3:1 Ratio (Single PTO drive) Racor Primary Fuel Filters  ..