Supply Boats, Landing Crafts & Crew and Pilot Boats for Sale

This 110 foot Steel Roll on Roll off Cargo Vessel was reportedly built by Bollinger Machine Shop and Shipyard Inc of Lockport LA in 1972 and reportedly refit in 2017. The owner of the vessel has reported that the vessel underwent an extensive refit after purchase and prior to delivery. The refit was reported to have included but not limited to the following: • Refurbishment of the drive trains and rudders. • Replacement and upgrades of the main cargo deck and support structures (24’x50’x 3/8 steel plate). • Extensive exterior sand blasting and painting. • Overhaul/service both main propulsion systems. • Overhaul/service electrical systems. • Ultrasonic Testing hull wetted surface areas. • Install doublers near keel ballast tanks. • ..

This Steel Hull Landing Craft for sale is being built on spec with marketing supported by Workboats-USA, LLC. At 87' LOA including 12' x 16' Ramp, she encompases 2000 square ft of clear deck space and will be powered by (4) 8 Cylinder, all aluminum, Cox 300 SHP outboard diesels totalling 1,200 HP. These common rail, 480 ft.lb torque, Twin turbo charged fuel injected diesel engines offer up to (3) times the life of gasoline engines while consuming 25% less fuel attaining a 12kt Cruise Speed.

This LCM-8 Landing Craft for sale with Workboats-USA had been rebuilt in 1998 by the U.S. Army and is reported to be in great working condition.

This offshore supply vessel is offered through Workboats-USA at an extremely low price. A fairly recent survey is available upon request but only to be relied upon as a general guide to layout. Vessel is currently dry docked and during February 11th inspection, one engine shows water intrusion and one generator needs repair or replacement. The exterior hull above and below water line, according to the survey, appeared to be in fair condition with respect to the age of the vessel.

This USCG approved passenger vessel is an aluminum constructed crew boat with a model bow and square stern, a semi - V bottom and hard chines. The bottom plating is 1/2 "from the stern forward 40ft and the remaining is 3/8"plating. Vessel is twin screw and powered by twin Cummins K19 with a speed of 26 knots. One is new and the other with only 5K hours. Current COI for 26 passengers plus crew. Coast Guard approved to provide services on near coastal water route up to 100 miles offshore. Additional passenger capacity can be added by request. The hull is arranged from forward to aft as follows: Wheel house raised 11/4 level above main deck Crew berthing and galley combination below the wheelhouse Passenger lounge with double bottom void with forward fuel and pot..

Builder/Year Swiftship 1970 Hull Aluminum V DIMENSIONS Length 65’ Beam 18’ Depth 9.2’ Draft 4.5’ Tonnage Gross/Net 71/48 Clear Deck Space 28’ x 14’ PROPULSION Main Engines (2) GM 12V-71 Total HP 900 Steering Hydraulic Reduction Gear Twin Disk MG-514 C Average Speed 18 Knots Fuel Consumption 45 GPH Fuel Capacity 1,200 Gallons CAPACITIES: Passengers 12 including crew Deck Cargo 9,675 lbs USCG Certificate 100 Miles EQUIPMENT Generators 20 KW GM 2-71 Navigation Radar, GPS, Loran, Compass Electronics VHF Radio, Furuno FS1503 Accommodations: A/C Heating Air Comp

This 72 Meter Ro/Ro Landing craft for sale is off the market, but contact us below for an excellent alternative. This vessel featured a 40 Ton McGregor crane designed to load and unload containers upon this 232 ' ship. TONNAGES: DWT 1,886 on Draft (Summer) 3 mt GRT / NRT 1,678/503 - Light Displacement 2,978 CARGO CAPACITIES: 665 sqm roro deck 131 TEU @ 12 Tons Reefer Plugs: 20 DECK PARTICULARS: Bow ramp 8.8/8.0 m - 30 ton axle load 1x40 ton Mcgregor Crane ..

This steel landing craft for sale by Workboats-USA has a cargo capacity of 96 GRT and 76 NRT. Two new in 2015 Scania D111 T3 450HP Tier 3 engines were installed in August 2015. She was COI certified as a freight ship under USCG Sub-Chapter1. Well equipped vessel in outstanding condition complete with a Hydra-Pro 2 tonne crane and Kobelt hydraulic steering.

This U.S. built steel landing craft for sale was dry docked for inspection and refit in 2016. New Marine Pre-Sale Survey report completed 04/04/2019. Just sold, but do Email us below for an alternative. Props, shafts, cutlass bearings plus a full list of maintenance and refit items have been performed in 2016. She runs between 8 and 10 knots. Previously USCG documented and now located in the Caribbean, she qualifies for redocumentation if needed. Vessel has a 1506' sg.ft. cargo deck with a hydraulically operated 17' ramp and port and starboard quarter spuds. Refit items included: Dismantling and reassembling of rudders. Change of cutlass bearings, including internal and external. Removing the tail shaft towards Stern for inspection..

This used crew boat for sale at Workboats-USA was built in 1972, has been well maintained and operational. This used Breaux Bay crew boat is all Aluminum and features a Deep V hull and has a current USCG COI in place. DIMENSIONS Length 65’ Beam 17’ Depth 5.8’ Draft 4.5’ Tonnage Gross/Net 66/45 Deck Space 23’ x 14’ PROPULSION Main Engines (2) GM 12V-71 Total HP 900 Steering Hydraulic Reduction Gear (2) Twin Disk MG-514 Speed 20 Knots Fuel Consumption 45 GPH Fuel Capacity 1,200 Gallons CAPACITIES: Total Passengers 12 Deck Cargo 7,700 lbs USCG Certificate 100 Miles EQUIPMENT: Generator 20 KW GM 2-71 Navigation Radar, GPS, Compass Electronics VHF Radio, Single Side Band Accommodations A/C Heating Air Compressor..

This Breaux Bay Aluminum Crew Boat for sale carries 12 passengers and is COI current for 100 mile offshore navigation. DIMENSIONS: Length 65’ Beam 17’ Depth 5.8’ Draft 4.5’ Tonnage Gross/Net 66/45 Deck Space 23’ x 14’ PROPULSION: Main Engines (2) GM 12V-71 Total HP 900 Steering Hydraulic Reduction Gear (2) Twin Disk MG-514 Speed 20 Knots, Fuel Consumption 45 GPH Fuel Capacity 1,200 Gallons. CAPACITIES: Total Passengers 12 Deck Cargo 7,700 lbs USCG Certificate 100 Miles EQUIPMENT: Generator 20 KW GM 2-71

This used utility supply boat for sale by Workboats-USA is a U.S. flagged vessel built by Covacevich Shipyards. Boat is currently working with current COI for 20 passengers. Powered by twin DD 16V-71's totaling 950 max HP she has a clear deck space of 24' x 75' and run approximately 12 knots, consuming approx. 35 GPH. She is certified for 20 passengers and is equipped with A/C & heat. Twin 3-71 DD gensets provide 40KW each.