Offshore Supply Vessels, Ocean Tugs, Lift Boats and Harbor Tugs For Sale

Two Sisterships available. One with current COI, the other under USCG approval for Reinstatable. Conversion at nearby shipyard for other uses!

This 2007 ocean going tug for sale is offered as a "Project Vessel" as her Main Engines and engine room containing 2-Cummins KTA 50-M2 marine diesels totalling 2,800 HP has taken on approximately 7' of water requiring all propulsion equipment, running gear and electrics to be replaced. Email us below for full details.

This liftboat vessel is 115' in length with a Max Deck Capacity of 800,000# , supporting (3) 200' 66"diameter legs with a wall thickness of 1 3/4", being braced inside. Maximum Working Water Depth: 160' Max Sea Conditions: 5' (Jacking). Currently undergoing USCG inspections and should be ready to view April 2019.

Z Drive Tugs for sale by workboats-usa.com are chosen for their enhanced ability for assisting and escorting vessels in tight harbors. This harbor assist vessel for sale, direct from owner, has been equipped with Ulstein "Z" drives for the ultimate in bollard pull (81mt) and maneuverability combined. Handling Two (2) 3516C CAT Diesels, 6,300 BHP this 104' tractor tug is stabilized by a 42' beam and 19' draft. Built on Gulfport MS in 2009, this late model tug has been fastidiously maintained and ready to continue working. DIMENSIONS : 110’ X 42’ X 19’ Draft (Hull): 11’8” Draft (Maximum): 26’2” Draft (Normal): 23’ Deadweight Tonnage: 684.37 LT CAPACITIES: Fuel Oil: 92,343 gals. Potable Water: 13,477 gal..

This late model 2011 Anchor Handling Tug for Sale located in the Persian Gulf is powered by Twin CAT 3516B-HD marine engines TTL 5,220 BHP with a service speed of 11 knots.

ACCOMMODATIONS FOR 42 FULLY AIR CONDITIONED. 2 X CAT 2575 BHP EACH MAX SPEED/CONSUMPTIOM 12.5 KNOTS/16CBM PER DAY SERVICE SPEED/CONSUMPTION 10KN /13.5CBM PER DAY ECO SPEED/CONSUMPTION 9KN/12CBM PER DAY ELECTRO-HYDRAULIC TUGGER WINCH 2 X 10T@ 15M/MIN DRUM CAPACITY: 200M (L) X 22M (O) SWR DECK CRANE 1X5T TOWING/AHT WINCH 1 X ELECTRO-HYDRAULIC DOUBLE DRUM AHTW-150T UPPER DRUM CAP (TOW) 1000M (L) X 56MM (O) SWR LOWER DRUM CAP (AH) 1000M (L) X 56MM (O) SWR L DRILL WATER – 263CBM FRESH WATER – 360CBM FUEL OIL – 483CBM @ 90% SEWAGE – 122CBM @ 90% LIQUID MUD – 333CBM @ 90% DRY BULK – 168CBM @ 90% FREEZER/CHILLER – 10CBM /10CBM PUMPS

This late model, ABS Classed, 2011 anchor handling tug for sale is a vessel designed with the objective of either tugging, towing an offshore oil-rig, a ship or use as af firefighting rescue vessel. Extreme deck strength capable of handling 5 Ton/m2, with 3,280' of Towing Wires. She has a working speed of 12 kts consuming approximately 2,550 US GPD.

DP1 MINI SUPPPLY BOAT FOR SALE BUILDER…………………MASTER BOATS GROSS TONNAGE……88 NET TONNAGE…60 YEAR BUILT…………………2007 ABS LOADLINE & ADP11/ DP1 DIMENSIONS LENGTH: 150’ BEAM: 36’ DEPTH: 12’ CLEAR DECK: 90’ x 30’ @ 2700’ SQ FT DECK CARGO…....…335 LONG TONS PROPULSION MAIN ENGINES…………CATERPILLAR MODEL 3508B's Cruise 12kts. MAX HP: 1700 AT 1200RPM STEERING: HYDRAULIC REDUCTION GEAR…………TWIN DISC MODEL 6690 -3.21.1 STERN CONTROLS WITH 300 HP BOW THRUSTER PROPELLERS: 4 BLD BRONZE FUEL CAPACITY…..43,000/95,920 GALS* BALLA..

(Now available, We also have 2 similar vessels that came off charter with all STIM equipment removed). Perfect for those needing newer systems.... This DP2 Well Stimulation Vessel, is offered through Workboats-USA and direct from owner, U.S. built in 2009 and designed for endurance and efficiency for operataion in some of the most hostile environments across the globe. This high-capacity ship provides a wide range of services in deep water, including matrix acidizing, acid fracturing, proppant fracturing, sand control, and scale control. The vessel also features an optimized hull to create less drag in the water, and the diesel electric propulsion allows horsepower to be used on an as-needed basis, which in turn reduces the amount of fuel burned. DIMENSION..

Vessel Type: AHTS Tug Year Built 2009 Shipyard Jaya Shipbuilding DIMENSIONS Dimensions 229.82 ft. X 52.5 ft. X 23.6 ft. (70.05 m X 16 m X 7.2 m) Design Draft 20.01 ft. (6.1 m) Clear Deck 42 ft. x 122 ft. (12.80 m x 37.19 m) Cargo Deck Area 5,124 sq. ft. (476.04 sq. m) Deck Strength 7.38 LT/sq. ft. (7.5 MT/sq. m) Deck Cargo Capacity 590.52 LT (600 MT) Deadweight Tonnage 2,538.69 LT (2,579.43 MT) CAPACITIES Fuel Oil 235,319 gals. (890.78 cu. m) Ballast/Drill Water 102,353 gals. (387.45 cu. m) Fresh Water 161,536 gals. (611.48 cu. m) Dry Bulk 1,257.96 barrels (200 cu. m) Liquid Mud 4,045 barrels (643.12 cu. m) MACHINERY Main Engines Two (2) 3,000 kW (8,046.13 BHP) Speed 13.5 knots Towing and Anchor Handling Equipment: One (1) x electro-hydraulic waterfall double ..

AHTS for sale by Workboats-USA, LLC direct from owner. She is a Fully classed, Jones Act enabled, US registered and built Vessel. ABS AMS Towing,\ABS Maltese Cross A1USCG Subchapter L. This high end 279' AHTS, is powered by Four (4) EMD 16-710-G7B, 16,000 BHP engines, accommodates 62 passengers and is outfitted as seen below.