|
13. |
|
New and used Truckable Pushboat Tugs for sale
|
|
2017
|
Truckable Tug
|
25'7"
|
|
|
Truckable tug boats for sale to civil engineering companies are our specialty. (Good selection usually available (Subject to prior sale or contract in process). Some come Fully optioned including: 7.5 Kw Westerbeke Generator Package Complete LED flood work light Package Towing Mast Light Package Over Head Electronics Mounting Package with fuse block ICOM Dual VHF radio package LED GoLight Search light with dash mounted control Engine Room Polyurethane White Top Coat Pilot Chair with Base 120v Heat System Upgraded Engine Panel Gear Temperature and Pressure Hull: " Bottom 5 - 16 A36 " Sides 3 - 8 A36 " Deck 5 - 16 A36 " Fwd Transverse Bulkhead 5 - 16 A36 " Aft Transverse Bulkhead 5 - 16 A36 Machinery " (2) New John Deere 9.0L 6090AFM85 285 hp each Tier 3 Ce..
|
14. |
|
Late Model Truckable Push boat Tug For Sale
|
Custom Build
|
USCG Reg 2016
|
Truckable tug
|
25'10"
|
|
|
This used truckable tug for sale or lease was exclusively offered by Workboats-USA, LLC. Sold 3-28-2019! She had Twin Cummins QSB6.7305MDI 305HP Keel Cooled Engines with a dry stack exhaust system, Hydraulic Power Assist Steering & Electronic Throttle controls. This is a 2016 USCG Registered vessel, having its keel laid in 2016, with Only approximately 1200 hrs. Call or Email us in the box below for a 2014 coming on line soon. 400 Gallon Fuel Capacity Light Draft: 3'9" Max Draft: 5'9" Hull Depth: 5' Eye Level: 17'6" 12V Rule Bilge Pump System Two..
|
15. |
|
Tow Boat for Sale - Coastal Unrestricted- Last Inspected 2017
|
|
1967
|
Coastal Tow Boat
|
73'
|
|
|
This used model bow tug for sale is powered by (2) Caterpillar D-398 diesel engines with Caterpillar 3192 reduction gears with 5.31.1 ratio. She has a 24,000 gallon fuel capacity. She was built in 1967 at the Martinolich Shipyard in Washington State. This tug is not sub chapter M. -Tug is reported by Owner to be in working condition but does need a generator and needs to be dry docked for some rudder work. She is rigged as following with an Almond Johnson 320SSTowing winch, 1450' of 1-1/2" wire. Bow winch: Foss conversion, 200' of 1-1/8" shipwire. Fuel: 10 Tanks, 24,000 gal. Water: 3 tanks, 3,000 gal. Quarters for 5 crew. Comp. elects inc. SSB, AIS, Furuno FR 811 Radar. Location in North Eastern USA.
|
16. |
|
Z Drive Tractor Tug For Sale
|
|
2009
|
Tractor Tug
|
110"
|
|
|
Z Drive Tugs for sale by workboats-usa.com are chosen for their enhanced ability for assisting and escorting vessels in tight harbors. This harbor assist vessel for sale, direct from owner, has been equipped with Ulstein "Z" drives for the ultimate in bollard pull (81mt) and maneuverability combined. Handling Two (2) 3516C CAT Diesels, 6,300 BHP this 104' tractor tug is stabilized by a 42' beam and 19' draft. Built on Gulfport MS in 2009, this late model tug has been fastidiously maintained and ready to continue working. DIMENSIONS : 110’ X 42’ X 19’ Draft (Hull): 11’8” Draft (Maximum): 26’2” Draft (Normal): 23’ Deadweight Tonnage: 684.37 LT CAPACITIES: Fuel Oil: 92,343 gals. Potable Water: 13,477 gal..
|
17. |
|
Lugger Tug For Sale
|
Custom Build
|
2011
|
Lugger Tug For Sale
|
67'
|
|
|
This Lugger Tug for sale was designed to operate in the challenging and diverse conditions found along coastal Louisiana. As a shallow draft lugger tug, she is ideally suited for rig tending and rig support in the marshes and sounds, but the vessel also incorporates features not traditionally found on lugger tugs like its large stern tow winch for safer towing in unprotected waters. In addition, with its high horsepower, uncharacteristic for a lugger tug she tows from shallow ponds to the offshore Gulf of Mexico. Type: 2011 Lugger Inspected: USCG Bridging Program Draft: 6'6" Engines: 2 Cummins Model QSK 19M Generators: 2 Onan Model MDDCA (40 KW) Construction: Welded Steel Fuel Capacity: 14,000 gallons Veeder Root fuel discharge meter Length: 67.5' Dec..
|
18. |
|
55' Push Boat Tug
|
|
1979
|
Push Boat Tug
|
55'
|
|
|
GENERAL DESCRIPTION: This Push Boat Tug is an all welded steel inland vessel with a square bow and stern. The tug is twin screw and diesel powered, constructed with a three (3) level all welded steel constructed deckhouse. Main deck: All the way forward is galley. Aft in the galley on the starboard side is the head. Access to the galley is by two (2) four dog watertight steel doors, one each port and starboard side. The doors are set on twelve (12) inch high coamings. Next aft is the engine room. Access to the engine room is by four (4) four dog watertight steel doors, one (1) each port and starboard side. The doors are set on twelve (12) inch high coamings. Access is also from the Galley to the engine room by an aluminum door. Secon..
|
19. |
|
U.S Flagged Ocean Going Tug For Sale
|
|
1977
|
Ocean Going Tug
|
105'
|
|
|
This ocean going tug for sale is a US flagged vessel and has a recently completed Sub Chapter M compliances. As of 10-22-20, she is committed to charter but check with us early Spring. Length overall (LOA) : 105 Feet / 32.0 Meters Flag : USA Breadth Molded : 30 Feet / 9.14 Metes Draft Light : 9.5 Feet / 2.89 Meters Draft Loaded : 12 Feet / 3.65 Meters Gross Tonnage : 179 Net Tonnage : 122 Main Engines (2) CAT 3516 Generator : (2) 75 KW GM 671 Year Built : 1977 Working Speed : 12 Knots Bollard Pull (Ahead) : 45 Short Tons Horsepower (Break) : 3,250 Fuel Capacity : 65,000 US Gallons Potable Water Capacity : 15,000 US Gallons Fuel Consumption : Accommodations : 11 Crew Members : Minimum 4+
|
20. |
|
2010 Truckable Tug for Sale
|
|
2010
|
Custom Truckable Tug
|
25
|
|
|
Custom Built: 2010 by Sisco / Marine Inland Fabricators. The specs on this freshwater truckable tug include twin Cummins power and flanking rudders. Length: 25’ Width: 14’ Depth: 5’ Engines: Two (2) John Deere 6068 Marine Diesel Engines Engine Hours: Port – 1273, Starboard – 1313 Flanking Rudders
|
21. |
|
Inland Class Model Bow Tugboat for Sale
|
Custom Build
|
1980
|
Model Bow Tug
|
68'
|
|
|
Just reduced price on this used Model Bow Tug for sale. Dimensions: 68' x 24' x 7'. Weighs out at 98 GRT She was built 1980 and is time for a refit. Powered by Twin Cat 3508's, 2200 hp, and 2 x 40 KW gensets, she carries 37,000 gal. fuel. She comes equipped with a Smatco single drum winch, complete electronics. 98 Gross Tons • Built 1980 - Gibson, LA • 2 CAT 3508 – (2200 HP) Twin Disc MG 540 Reverse Reduction Gear (2) John Deere 4045TFM75 • 65KW Generators Towing Winch • Smatco Winch • DPS44 • Cable Size: 1 1/8” 36,700 Gal. Fuel Capacity • Location: East Coast USA
|
22. |
|
20' Truckable Tugs for Sale
|
|
|
Truckable Tug
|
20'
|
|
|
Tugs being refit were used in fresh and/or brackish water. Only (1) left as of late September 2020. A new custom Pilot House will be installed and painted along with a new helm seat, full hydraulic steering, gauge panel, (2) new 4’ Push knees, tow bits and a 145HP 4-71 Detroit Diesel engine to be serviced with new oil and filters, hull blasted and painted too.
|
23. |
|
New and used Truckable Push boat Tugs For Sale
|
Custom Build
|
2020
|
Truckable tug
|
25'10"
|
|
|
This new truckable tug for sale was marketed through Workboats-USA, LLC. Next Completion 1st Qtr 2021. Call or email us from the boxes above to get in line. She was completed and included Custom options added such as the wheel house eye level extention permitting a 17' view with storage cabin seen beneath the pilothouse. Call or Email us at the tabs above to schedule your new build. :
|
24. |
|
Truckable Push boat Tugs For Sale
|
|
|
Truckable pushboat tug
|
25'7"
|
|
|
We specialize in providing new and used truckable tug boats for sale. Build time for new is growing so prepare now for the long awaited $1 trillion dollar infrastructure plan to replace or repair our nations crumbling bridges. Will complete build to suit. Twin or single engine versions now in construction. Common Options include a 7.5 Kw Westerbeke Generator Package Complete LED flood work light Package Towing Mast Light Package Over Head Electronics Mounting Package with fuse block ICOM Dual VHF radio package LED GoLight Search light with dash mounted control Engine Room Polyurethane White Top Coat Pilot Chair with Base 120v Heat System Upgraded Engine Panel Gear Temperature and Pressure Hull: " Bottom 5 - 16 A36 " Sides 3 - 8 A36 " Dec..
|